Austenitic Stainless Steel

We are the major Stocklist/Supplier of

SS 304 / 304 L
SS 316 / 316 L
SS 303
SS 321
SS 316 Ti etc..,

Steels with Chromium content between 16% and 26%, Nickel between 7% and 35% and Carbon (max. 0.15%), cannot be strengthened by quench hardening, but only through cold working (e.g. cold drawing).

The main features of these steels are their resistance to corrosion, which is generally higher than other stainless steels, and their nonmagnetic behaviour.

Stainless steel is a steel compound that should contain at least 10.5% chromium and contains levels of nickel, molybdenum, and niobium.

Contrasted with ordinary steel, stainless steel doesn’t handily consume, stain, or oxidize/rust. Stainless steel is available in a broad scope of forms, grades, finishes, gauges, widths, and lengths.

Various businesses depend on stainless steel for a wide scope of utilizations including aviation, auto, assembling, oil and gas, and some more.

W.N.	AISI	UNS	EN	BS
1.4870	–	–	X53CrMnNiNbN21-9	352S52
1.4881	–	–	X70CrMnNiN21-6	–
–	–	–	–	331S40
–	201	S20100	–	–
–	XM-28	S24100	–	–
1.4303	305	S30500	X4CrNi18-12/X5CrNi18-12	–
1.4550 / 1.4546	347 / 347H	S34700 / S34709	X6CrNiNb18-10 / X5CrNiNb18-10	347S31 / 347S20
1.4948	304H	S30409	X6CrNi18-10 / X6CrNi18-11	–
1.4948	304H	S30409	X6CrNi18-10 / X6CrNi18-11	–
–	304H	S30409	–	–
1.4301/1.4307	304/304L	S30400/S30403	X5CrNi18-10/X2CrNi18-9	304S15/304S31
1.4306	–	–	X2CrNi19-11	304S11
1.4311	304LN	S30453	X2CrNiN18-10	–
–	XM-21	S30452	–	–
1.4301/1.4307	304/304L	S30400/S30403	X5CRNI18-10/X2CRNI18-9	304S15/304S31
1.4541	321	S32100	X6CrNiTi18-10	321S31
1.4878 / 1.4544	321H	S32109	X8CrNiTi18-10	–
1.4962	–	–	X12CrNiWTiB16-13	–
–	317	S31700	–	–
–	317L	S31703	–	–
1.4438	–	–	X2CrNiMo18-15-4	–
1.4439	–	–	X3CrNiMoN17-13-5	–
1.4841	314	S31400	X15CrNiSi25-21 / X15CrNiSi25-20	314S25
1.4845	310/310S	S31000/S31008	X8CrNi25-21/X12CrNi25-21	310S31
1.4833	309	S30900	X12CrNi23-13 / X7CrNi23-14	–
–	EV4	S63017	–	381S34
1.4828	–	–	X15CrNiSi20-12	–
1.4432 / 1.4436	–	–	X2CrNiMo17-12-3 / X5CrNiMo17-13-3	316S33 / 316S14
1.4580	–	–	X10CrNiMoNb18-10	–
–	316H	S31609	–	–
1.4401/1.4404	316/316L	S31600/S31603	X5CrNiMo17-12-2/X2CrNiMo17-12-2	316S14/316S19
1.4435	–	–	X2CrNiMo18-14-3	316S13 / 316S14 / 316S33
–	316LN-IG	–	–	–
1.4429	–	–	X2CrNiMoN17-13-3	–
1.4406	316N / 316LN	S31651 / S31653	X2CrNiMoN17-11-2	–
1.4429	316LN	–	–	–
–	316TI	S31635	–	–
1.4571	–	–	X6CrNiMoTi17-12-2	–
1.4571	–	–	X6CrNiMoTi17-2-2	–
1.4310 / 1.4300 / 1.4324	302	S30200	X10CrNi18-8 / X12CrNi18-8	302S31 / 301S22
1.4305	303	S30300	X8CrNiS18-9	303S31
1.4570	–	–	X6CrNiCuS18-9-2	–
1.4747	–	–	X80CrNiSi20	–
1.4732	–	–	X80CrSiMoW15-2	–
1.4305	303	S30300	X8CrNiS18-9	303S31
–	XM-19	S20910	–	–
–	–	S21800	–	–
1.4785	–	–	X60CrMnMoVNbN21-10	–
1.4547	F44	S31254	X1CrNiMoCuN20-18-7	–
1.4835	F45	S30815	X9CrNiSiNCE21-11-2	–

Some of the features of austenitic stainless steel include:

Excellent corrosion resistance
Non-magnetic when annealed
Rapidly work harden with cold work
Not hardenable by heat treatment
Ductile and readily formable
Excellent weldability
Hygienic with excellent cleanability
Good performance at high temperatures
Excellent performance at low temperatures

CHEMICAL COMPOSITION OF STAINLESS STEEL(IN%)
AISI	C	S	P	Mn	Si	Cr	Mo Max	Ni	OTHER MAX
	Max	Max	Max	Max	Max
301	0.15	0.030	0.045	2.00	1.00	16.0-18.0	–	6.00-8.00	–
302	0.15	0.030	0.045	2.00	1.00	17.0-19.0	–	8.00-10.0	–
303	0.15	0.15	0.200	2.00	1.00	17.0-19.0	–	8.00-10.0	ZR OF MO-0.60
304	0.08	0.030	0.045	2.00	1.00	18.0-20.0	–	8.00-10.0	–
304L	0.030	0.030	0.045	2.00	1.00	18.0-20.0	–	8.00-12.0	–
304LN	0.03	0.030	0.045	2.00	1.00	18.0-20.0	–	8.00-12.0	NO.10-0.16
305	0.12	0.030	0.045	2.00	1.00	17.0-19.0	–	10.5-13.0	–
308	0.08	0.030	0.045	2.00	1.00	19.0-21.0	–	10.0-12.0	–
309	0.20	0.030	0.045	2.00	1.00	22.0-24.0	–	12.0-15.0	–
309S	0.08	0.030	0.045	2.00	1.00	22.0-24.0	–	12.0-15.0	–
310	0.25	0.030	0.045	2.00	1.50	24.0-26.0	–	19.0-22.0	–
310S	0.08	0.030	0.045	2.00	1.50	24.0-26.0	–	19.0-22.0	–
314	0.25	0.030	0.045	2.00	3.00	23.0-26.0	–	19.0-22.0	–
316	0.08	0.030	0.045	2.00	1.00	16.0-18.0	2.00-3.00	10.0-14.0	–
316L	0.03	0.030	0.045	2.00	1.00	16.0-18.0	2.00-3.00	10.0-14.0	–
316TI	0.08	0.030	0.045	2.00	1.00	16.0-18.0	2.00-3.00	10.0-14.0	TI-5XC
317	0.08	0.030	0.045	2.00	1.00	18.0-20.0	3.00-4.00	11.0-15.0	–
317L	0.03	0.030	0.045	2.00	1.00	18.0-20.0	3.00-4.00	11.0-15.0	–
318	0.08	0.030	0.045	2.00	1.00	17.0-19.0	1.75-2.75	13.0-15.0	CB+Ta10XC(MAX)
321	0.08	0.030	0.045	2.00	1.00	17.0-19.0	–	9.00-12.0	TI-5xc
329	0.20	0.030	0.040	1.00	0.75	23.0-28.0	1.00-2.00	2.50-5.00	–
347	0.08	0.030	0.045	2.00	1.00	17.0-19.0	–	9.00-13.0	CB/TA-10xc
C=CARBON Si=SILICON Mn=MANGANESE P=PHOSPHOROUS S=SULPHUR Cr=CHROMIUM Mo=MOLYBDENUM
Ni=NICKEL N=NITROGEN Zr=ZIRCONIUM Ti=TITANIUM Cb=COBALT Ta=TANTALUM AI=ALUMINIUM